My house has
two HVAC units, one for downstairs and another for upstairs. I looked at
several controllable thermostats and I ended up going with two . I did look at
some other thermostats like control 4, but they were quite a bit more
expensive. The
wulian temperature controller of zigbee home automation look modern and
stylish, which fits my house better anyway. So I don't plan on using the
built-in programming since wulian temperature controller can control the thermostat
more efficiently.
The plug-in
Insteon adapter on the bottom of the wulian temperature
controller of zigbee home automation is what
actually allows you to control the thermostat. Some of the newer thermostats
actually have the adapter built-in. You can control and query the heat set
point, cool set point, program status, and fan status. The latest Insteon adapters
transmit the current room temperature back to the main controller automatically
along with any local changes made at the actual unit. This is handy for
allowing the main controller to be overridden just by changing the
temperature at the thermostat.
How I Use the wulian temperature controller of zigbee
home atutomation
The main
purpose for the temperature controller is the ability to be able to
change the heating and cooling set points based on different conditions inside
and outside the house. The temperature controller of zigbee home automation are adjusted based
on the following conditions:
- If I am home and all conditions
are normal, the thermostats are set to my 'normal' set points.
- If the house is unoccupied, the
set points are turned back to save on energy costs.
- If I am home and it is between
70F and 76F outside, and the outside humidity is below 60%, set the
thermostats back to my 'power save' set points and instruct over the
intercom to open the family room french doors and master bedroom door that
lead out onto the screened-in back porch.
- If any door in the house is
left open for more than two minutes both the upstairs and downstairs
thermostats are automatically turned off and an announcement is made.
- If the thermostats are off and
the last exterior door is closed, the thermostats are turned on again
according to the current schedule.
- If the house is in sleeping
mode, the thermostats are set back to my 'sleeping' set points.
- If “Guest Mode” is enabled, set
the thermostats to a very comfortable 74F so long as no exterior doors are
open.
Use this, you can DIY which type of climate
you want , and no need to let professional person to do that for you.
没有评论:
发表评论